These kits are based on the 48″ pole kits from surplus vendors

VHF/UHF
[ ]Antenna Mast Portable mast set with tripod yoke/Drive on , used for VHF/UHF communications.
[ ]Stake, 10″ (4)
[ ]Antenna, 2m/70cm J-pole, w/ SO-239 connector
[ ]Hose Clamp, adjustable (2)
[ ]Antenna, dual-band Yagi.
[ ]Adapter cable, BNC to SO-239
[ ]Antenna, 2m/70cm 1/4-wave ground plane.
[ ]Ground rod, copper, 4 ft, w/ cable clamp

HF Antenna Setup Kit
This kit has the tools and parts needed to set up and guy the 30-ft antenna mast, as well as a couple of inverted-V wire antennas.
[ ]Antenna Mast Portable mast set with tripod yoke/Drive on support
[ ]Antenna, 20/40/80-meter multi-wire inverted-V, w/SO-239 center connector
[ ]Antenna, 20-meter inverted-V, w/ SO-239 coax pigtail connector
[ ]Pulley, for raising/lowering antenna without lowering mast
[ ]Stake, 10″ (4)
[ ]Lower guy assembly, w/ guy ring and (4) sets of 1/4″ nylon rope x 33 ft, threaded link and Line-Grip
[ ]Upper guy assembly, w/ guy ring and (4) sets of 1/4″ nylon rope x 45 ft, threaded link and Line-Grip
[ ]Guy rope extension, 1/4″ nylon rope x 10 ft, snap link and Line-Grip (2)
[ ]Guy anchor stake, 18 in, w/ eyebolt, guy leaders & snap links (6)
[ ]Ground wire, #4 AWG, green, 10 ft
[ ]Hose Clamps, adjustable (2)
[ ]Snap links and threaded links, asstd.

Antenna masts can be combined  with VHF/UHF on top and HF inverted V below, (NVIS)top sections should be fiberglass

Coax Bag
[ ]RG-8x/RG-8 coaxial cable w/ ferrite choke, 33 ft (3)
[ ]RG-8x/RG-8 coaxial cable w/ coupler, 33 ft (3)
[ ]RG-8x/RG-8 coaxial cable w/ coupler, 50 ft
[ ]Duct tape, heavy-duty, 1.88″
[ ]Gaffer’s tape, yellow, 1.88″